Wireless for home and office

(Based on 0 Review)

hAP lite

CAD$32.00

hAP Lite with 650MHz CPU, 32MB RAM, 4xLAN, built-in 2.4Ghz 802.11b/g/n 2x2 two chain wireless with integrated antennas, RouterOS L4, plastic case, PSU

More details

Product Description


hAP lite

The home Access Point lite (hAP lite) is an ideal little device for your apartment, house or office.

It supports button triggered WPS, for the convenience of not typing a complicated password when somebody wants to have wireless internet access, and can also be told to change to cAP mode and join a CAPsMAN centrally managed network by the push of a button.

Of course, the device runs RouterOS with all the features, bandwidth shaping, firewall, user access control and many others.

The hAP lite is equipped with a powerful 650MHz CPU, 32MB RAM, dual chain 2.4GHz onboard wireless, four Fast Ethernet ports and a RouterOS L4 license. USB power supply is included.

Wireless specifications

2.4 GHz
TXRX
1MBit/s 22 -96
11MBit/s 22 -89
6MBit/s 20 -93
54MBit/s 18 -74
MCS0 20 -93
MCS7 16 -71

wireless parameters may be limited in software, depending on your local regulatory limitations

Performance test results

RB941-2nD QCA9531 (650Mhz) 100M all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 32.5 394.8 94.0 385.0 173.6 88.9
Bridging 25 bridge filter rules 32.5 394.8 56.1 229.8 56.7 29.0
Routing none (fast path) 32.5 394.8 94.0 385.0 160.8 82.3
Routing 25 simple queues 32.5 394.8 63.7 260.9 72.6 37.2
Routing 25 ip filter rules 32.5 394.8 33.8 138.4 34.6 17.7
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Product Review


Add a review

Your email address will not be published.Required fields are marked *

Additional Information


Product code RB941-2nD-TC
Operating System RouterOS
License level L4
CPU QCA9531-BL3A-R
CPU core count 1
Architecture MIPS-BE
CPU nominal frequency 650 MHz
Size of RAM 32MB
10/100 Ethernet ports 4
10/100/1000 Ethernet ports None
SFP DDMI None
SFP ports None
SFP+ ports None
MiniPCI slots None
MiniPCI-e slots None
Wireless chip model QCA9531-BL3A-R
Wireless standards 802.11b/g/n
Number of chains 2
Antenna gain DBI 1.5 dBi
Number of USB ports None
USB slot type None
Serial port None
Memory Cards None
Power Jack 1
Supported input voltage 5 V - 5 V
Max Power consumption 3W at 5V
802.3af support No
PoE in No
PoE out No
Voltage Monitor No
Current Monitor No
CPU temperature monitor No
PCB temperature monitor No
Dimensions 113x89x28mm

Download

Related Products

Recently viewed products