CCR1009-7G-1C-1S+PC

CCR1009-7G-1C-1S+PC

New product

7x Gigabit Ethernet, 1x Combo port (SFP or Gigabit Ethernet), 1xSFP+ cage, 9 cores x 1GHz CPU, 2GB RAM, LCD panel, passive cooling desktop enclosure, SmartCard slot, RouterOS L6, PSU

More details

9 Items

In stock

CAD$730.00

Add to wishlist

Data sheet

Product codeCCR1009-7G-1C-1S+PC
Operating SystemRouterOS
License levelL6
CPUTLR4-00980CH-10CE-A3b
CPU core count9
ArchitectureTILE
CPU nominal frequency1 GHz
Size of RAM2 GB
10/100 Ethernet portsNone
10/100/1000 Ethernet ports7
SFP DDMIYes
SFP ports1
SFP+ ports1
MiniPCI slotsNone
MiniPCI-e slotsNone
Number of chainsNone
Antenna gain DBINo
Number of USB ports1
USB slot typemicroUSB type AB
USB Power ResetYes
Storage typeNAND
Storage size128 MB
Serial portRS232 + Header
Operating temperature range-20C .. +60C
Power Jack3
Supported input voltage14 V - 57 V
Max Power consumption34W
802.3af supportNo
PoE inYes
PoE outNo
Voltage MonitorYes
Current MonitorYes
CPU temperature monitorYes
PCB temperature monitorYes
Dimensions272x190x47mm

More info

CCR1009-7G-1C-1S+PC

The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.

Important changes

No switch-chip - the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.

Combo-port - a single 1Gbit software interface that has two hardware interfaces - an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.

100Mbps SFP support - this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.

More throughput - because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.

This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. It’s powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.

Unit also includes a LCD touchscreen, smart card slot, microSD and a SFP+ port for 10G connections.

Ethernet test results

CCR1009-7G-1C-1S+PCTile 9 core all port test 1GHz with combo-port and SFP+
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)1,300.415,792.13,759.415,398.514,874.07,615.5
Bridging25 bridge filter rules1,100.413,363.31,183.84,848.81,184.0606.2
Routingnone (fast path)1,300.415,792.13,759.415,398.514,581.07,465.5
Routing25 simple queues1,300.415,792.11,686.07,175.61,699.61,142.1
Routing25 ip filter rules615.87,478.3660.92,812.8668.3449.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Reviews

Write a review

CCR1009-7G-1C-1S+PC

CCR1009-7G-1C-1S+PC

7x Gigabit Ethernet, 1x Combo port (SFP or Gigabit Ethernet), 1xSFP+ cage, 9 cores x 1GHz CPU, 2GB RAM, LCD panel, passive cooling desktop enclosure, SmartCard slot, RouterOS L6, PSU