cAP 2n


New product

Ceiling AP, 2.4GHz, 400MHz CPU, 64MB RAM, RouterOS L4

More details

Please call!


Add to wishlist

Data sheet

Product codeRBcAP2n
Operating SystemRouterOS
License levelL4
CPU core count1
CPU nominal frequency400MHz
Size of RAM64MB
10/100 Ethernet ports1
10/100/1000 Ethernet portsNone
MiniPCI slotsNone
MiniPCI-e slotsNone
Wireless chip modelAR9331-AL1A
Wireless standards802.11b/g/n
Number of chains1
Antenna gain DBI2dBi
Number of USB portsNone
Serial portNone
Memory CardsNone
Operating temperature range-30C to +70C
Power JackNone
Supported input voltage11 V - 57 V
Max Power consumption2W
PoE inPassive
PoE outNone
Voltage MonitorNo
Current MonitorNo
CPU temperature monitorNo
PCB temperature monitorNo
Dimensions185mm diameter, 31mm heigh

More info

cAP 2n

RouterBOARD cAP-2n (ceiling Access Point) is our first 2.4GHz ceiling AP. Inconspicuously designed, it blends into the environment, perfect for hospitality business like hotels, airports, shopping malls etc.

cAP-2n supports 802.11b/g/n and can be powered by PoE. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location.

Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.

Everything is included to get you started, wall/ceiling mount, PoE injector, power adapter and even the screws and screw anchors.

Wireless specifications

2.4 GHz

wireless parameters may be limited in software, depending on your local regulatory limitations

Performance test results

RBcAP2nAR9331 100M 1 port test
ModeConfiguration1518 byte512 byte64 byte
Bridgingnone (fast path)8.198.423.596.3146.775.1
Bridging25 bridge filter rules8.198.423.596.349.625.4
Routingnone (fast path)8.198.423.596.3142.472.9
Routing25 simple queues8.198.423.596.380.341.1
Routing25 ip filter rules8.198.423.596.335.818.3
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results


Write a review

cAP 2n

cAP 2n

Ceiling AP, 2.4GHz, 400MHz CPU, 64MB RAM, RouterOS L4