hAP

RB951Ui-2nD

New product

2.4GHz AP, Five Ethernet ports, POE-out on port 5, USB for 3G/4G support

More details

This product is no longer in stock

CAD$63.00

Add to wishlist

Data sheet

Product codeRB951Ui-2nD
Operating SystemRouterOS
License levelL4
CPUQCA9531
CPU core count1
ArchitectureMIPS-BE
CPU nominal frequency650 MHz
Size of RAM64MB
10/100 Ethernet ports5
10/100/1000 Ethernet portsNone
SFP DDMINone
SFP portsNone
SFP+ portsNone
MiniPCI slotsNone
MiniPCI-e slotsNone
Wireless chip modelQCA9531
Wireless standards802.11b/g/n
Number of chains2
Antenna gain DBI1.5 dBi
Number of USB ports1
USB slot typeUSB type A
Serial portNone
Memory CardsNone
Power Jack1
Supported input voltage6 V - 30 V
Max Power consumption5W
802.3af supportNo
PoE inYes
PoE outYes
Voltage MonitorNo
Current MonitorNo
CPU temperature monitorNo
PCB temperature monitorNo
Dimensions113x89x28mm

More info

hAP

This small home access point is the perfect device for homes or small offices where all you need is a wireless AP and a few wired devices connected. Based on our popular RB951-2n, the new hAP is an improvement in many areas.

The device can be powered from the power jack or with passive PoE from a PoE injector. The power adapter is included. The hAP is preconfigured, so all you need to do, is plug in the internet cable, the power, and start using the internet by connecting to the MikroTik network.

Wireless specifications

2.4 GHz
TXRX
1MBit/s22-96
11MBit/s22-89
6MBit/s20-93
54MBit/s18-74
MCS020-93
MCS716-71

wireless parameters may be limited in software, depending on your local regulatory limitations

Performance test results

RB951Ui-2nDQCA9531 (650Mhz) 100M all port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)40.6493.0117.4480.9217.0111.1
Bridging25 bridge filter rules40.6493.070.1287.170.936.3
Routingnone (fast path)40.6493.0117.4480.9200.8102.8
Routing25 simple queues40.6493.079.6326.090.846.5
Routing25 ip filter rules40.6493.042.2172.843.222.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Reviews

Write a review

hAP

hAP

2.4GHz AP, Five Ethernet ports, POE-out on port 5, USB for 3G/4G support

Download