GrooveA 52HPn


New product

2.4Ghz/5Ghz AP/Backbone/CPE, 500mW TX, N-male connector, includes 2.4Ghz/5GHz 6dBi Omni Antenna

More details

18 Items


Add to wishlist

Data sheet

Product codeRBGrooveA52HPn
Operating SystemRouterOS
License levelL4
CPU core count1
CPU nominal frequency600MHz
Size of RAM64MB
10/100 Ethernet ports1
10/100/1000 Ethernet portsNone
MiniPCI slotsNone
MiniPCI-e slotsNone
Wireless chip modelAR9342-BL1A
Wireless standards802.11a/b/g/n
Number of chains1
Antenna gain DBI6dBi
Number of USB portsNone
Serial portNone
Memory CardsNone
Operating temperature range-30C to +70C
Power JackNone
Supported input voltage9 V - 30 V
Max Power consumptionUp to 0.19A at 24V (4.56W)
PoE inYes
PoE outNo
Voltage MonitorYes
Current MonitorNo
CPU temperature monitorNo
PCB temperature monitorYes
Dimensions177x44x44mm, 193g

More info

GrooveA 52HPn

Our smallest outdoor series model - a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz wireless mode, and high 500mW output power! GrooveA has also supports AP mode.

With the Nv2 TDMA technology, up to 125Mbit aggregate throughput is possible! It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align.

NEW- now comes packaged with a 2GHz/5GHz 6dBi Omni antena!

Box contains: Groove unit, mounting loops, PoE injector, power adapter, 6dBi 2.4/5Ghz Omni antenna

Performance test results

RBGrooveA-52HPnAR9342 100M 1 port test
ModeConfiguration1518 byte512 byte64 byte
Bridgingnone (fast path)8.198.423.596.3148.075.8
Bridging25 bridge filter rules8.198.423.596.387.644.9
Routingnone (fast path)8.198.423.596.3148.075.8
Routing25 simple queues8.198.423.596.3106.654.6
Routing25 ip filter rules8.198.423.596.360.531.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results


Write a review

GrooveA 52HPn

GrooveA 52HPn

2.4Ghz/5Ghz AP/Backbone/CPE, 500mW TX, N-male connector, includes 2.4Ghz/5GHz 6dBi Omni Antenna