Ethernet routers

(Based on 0 Review)

CCR1009-7G-1C-1S+

CAD$730.00

 1U rackmount, 7x Gigabit Ethernet, 1x Combo port (SFP or Gigabit Ethernet), 1xSFP+ cage, 9 cores x 1.2GHz CPU, 2GB RAM, LCD panel, Dual Power supplies, SmartCard slot, RouterOS L6 

More details

In stock

Product Description


CCR1009-7G-1C-1S+

The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.

Important changes

No switch-chip - the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.

Combo-port - a single 1Gbit software interface that has two hardware interfaces - an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.

100Mbps SFP support - this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.

More throughput - because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.

Ethernet test results

CCR1009-7G-1C-1S+ Tile 9 core all port test with combo-port and SFP+
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 1,300.4 15,792.1 3,759.4 15,398.5 17,782.8 9,104.8
Bridging 25 bridge filter rules 1,244.4 15,112.0 1,395.3 5,715.1 1,368.1 700.5
Routing none (fast path) 1,300.4 15,792.1 3,759.4 15,398.5 17,411.2 8,914.5
Routing 25 simple queues 1,300.4 15,792.1 1,925.6 8,195.4 1,977.0 1,328.5
Routing 25 ip filter rules 739.2 8,976.8 793.9 3,378.8 801.8 538.8
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Product Review


Add a review

Your email address will not be published.Required fields are marked *

Additional Information


Product code CCR1009-7G-1S-1S+
Operating System RouterOS
License level L6
CPU TLR4-00980CH-10CE-A3b
CPU core count 9
Architecture TILE
CPU nominal frequency 1.2 GHz
Size of RAM 2 GB
10/100 Ethernet ports None
10/100/1000 Ethernet ports 7
SFP DDMI Yes
SFP ports 1
SFP+ ports 1
MiniPCI slots None
MiniPCI-e slots None
Number of chains None
Antenna gain DBI No
Number of USB ports 1
USB slot type microUSB type AB
Serial port RS232 + Header
Operating temperature range -20C .. +60C
Power Jack 2
Supported input voltage 15 V - 57 V
Max Power consumption 34W
802.3af support No
PoE in Yes
PoE out No
Voltage Monitor Yes
Current Monitor Yes
CPU temperature monitor Yes
PCB temperature monitor Yes
Dimensions 444x175x47mm

Related Products

Recently viewed products